T-fal SS-992896 Magnetic Deep Fryer Power Cord Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The T-fal SS-992896 is a replacement magnetic power cord, not a fryer: an accessory review for owners who lost or damaged the original cord. The listing ties it to the T-fal FF103850/89 deep fryer, the model number printed in its title, and gives only two facts beyond that: it is black and it uses a magnetic connector. Magnetic cords pull away if someone snags them, so a fryer full of hot oil is less likely to tip over. Our verdict: buy it if your fryer's rating plate or manual says FF103850 or names part SS-992896, and skip it otherwise. The listing has no length, rating or compatibility list, so do not assume it fits other T-fal fryers. With so little listed, this page only sorts out the fit question; we have not handled the part.
What stands out
- Listed for the T-fal FF103850/89 fryer
- Magnetic breakaway connector
- Low-cost spare part
Who it fits
Good fit for
Owners of the T-fal FF103850 deep fryer who need a new or spare cord.
Who should skip it
Anyone whose fryer model is not FF103850, or who needs the cord length first.
Verdict: A spare cord for one specific T-fal fryer.
SS-992896 details
Part SS-992896
T-fal's part number; match it to your manual.
Fits FF103850/89
The only fryer model named in the listing.
Magnetic connector
Breaks away if the cord is pulled.
Black
Length and rating not listed.
Design
A black power cord with a magnetic plug at the fryer end that snaps onto the appliance and releases when tugged. The listing shows no other specs: no length, no wattage rating and no materials.
Using it
Line up the magnetic end with the fryer's socket until it clicks in place, then plug the other end into the wall. Many fryers with magnetic cords want the cord attached to the fryer before the outlet; check your fryer's manual for the order.
If the magnet will not seat, the cord is likely meant for another model.
Before you buy
Read the model number on the bottom or back of your fryer first. The listing names only FF103850/89, and T-fal uses different cords across its fryer range.
Check before you buy
- Your fryer says FF103850
- Old cord is lost or frayed
- Magnetic socket on the fryer
- Fine without a listed length
The product at a glance
T-Fal Deep Fryer Magnetic Power Cord
Best for: FF103850 replacement cord
View on Amazon: T-Fal Deep Fryer Magnetic Power Cord Affiliate link
The T-fal SS-992896 is a black magnetic replacement power cord sold for the T-fal FF103850/89 deep fryer; the listing gives no length or electrical rating.
Pros
- Matches a named T-fal fryer
- Magnetic breakaway plug
- Cheap fix for a lost cord
Cons
- Only one fryer model named
- No length or rating listed
- Accessory only
Good fit if
- The rating plate on your fryer reads FF103850
- The original cord went missing in a move
Skip if
- Your T-fal fryer has a different model number
- You want the length confirmed first
Verdict: A part-number match for FF103850 owners only.
Specifications side by side
| Spec | T-Fal Deep Fryer Magnetic Power Cord |
|---|---|
| Color | Black |
| Model | SS-992896 |
If you are also replacing the cord on a garbage disposal, our insinkerator evolution 1hp power cord review covers that part's published specs in the same format.
Frequently asked questions
Which fryer does the T-fal SS-992896 cord fit?
The listing names the T-fal FF103850/89 deep fryer; check your fryer's model plate before ordering.
Is the T-fal SS-992896 a deep fryer?
No, it is only the magnetic power cord.
How long is the SS-992896 power cord?
The listing does not give its length.
Why do T-fal fryers use a magnetic cord?
A magnetic plug detaches if the cord is pulled, which helps keep a fryer of hot oil from being dragged off the counter.
